DIY Candy Button Dot Earrings

This post may contain affiliate links. If you make a purchase, I may receive a small commission.


DIY Candy Button Dot Earrings for Under 25 Cents a PairThis post may contain affiliate links

If you’re looking for a quick, easy and ridiculously inexpensive gift idea for your friends or family, these DIY candy button dot earrings are just the thing for you! When I say that they’re inexpensive, I mean that each pair of these costs only FIFTEEN CENTS to make! You can gift an entire strip of these fun candy button earrings for under $1.00! See what I mean – ridiculously inexpensive!

Candy Button Dot Earring Supplies

What You’ll Need:

Perler Beads and Pony BeadsStart by preheating your oven – 350 degrees for perler beads (shown above on the left) or 400 degrees for pony beads (on the right) and lining a baking sheet with parchment paper. (Note: although I am showing them together in the photo above, they need to be melted separately due to the different temperatures.) DO NOT use the convection setting if your oven has one! Perler beads are designed to be melted, so they will not cause any odors or fumes; however, the larger plastic pony beads will release a strong melting plastic smell. I highly advise melting pony beads in a well ventilated area only!

Melted Pony Beads for DIY Candy Dot EarringsKeep a close eye on your beads as they are melting! Perler beads take about 30 minutes at 350 degrees to form the candy dot shape (first melting into flat rings and then into a dot after awhile). Pony beads melt much more quickly, and they will continue to spread and get flatter and wider the longer they are left in the oven. I generally remove mine after 8-10 minutes at 400 degrees. Allow to cool before removing from the parchment paper.

Making Candy Button Earrings is Fast Easy and CheapUse a small dab of E600 glue to attach the earring posts to the back of the dots. I like to pour a small amount of glue into a container and then use a toothpick to apply it to the small surfaces. Allow to dry and cure for 24 hours.

Candy Button Earrings Make a Fast and Inexpensive Gift IdeaCut a strip of white cardstock approximately 2″x6″ and poke the earrings through to look like candy buttons. Secure the earring backs on the reverse side of the cardstock to keep the earrings in place.

candy button earrings on earring sheet with candy ornamentsYou can see the size difference between the pony beads (left) and the perler beads (right). The pony bead earrings are more appropriately sized for older children and adults while the smaller sized perler beads will work for all ages.

DIY Candy Button Earrings

DIY Candy Button Dot Earrings TutorialI just can’t get over how cute and fun these are (and ridiculously inexpensive, of course!)!

Make Your Own Candy Button Dot Earrings for Less Than a Quarter a Pair

Candy Button Earrings and Felt Candy Christmas OrnamentsThese DIY candy button earrings are sure to be a huge hit with both children and adults alike! Now you can knock off everyone on your Christmas list for just a few dollars!

Leave a Reply

Your email address will not be published. Required fields are marked *

19 Comments

    1. Hi Hope,

      You can give it a try, but since the beads are plastic, sometimes the hot glue will just peel right off instead of holding securely.

  1. I’ve tried several times to do the pony beads and they never melt evenly. Some work and most bubble and blob out. What could I be doing wrong?

  2. Hi, this is my first time trying this project. I purchased the 4+ Biggie Beads from Michael’s. But i’m not sure if they will be to big for a 4& 6 year old when they melt. is there a specific size i should look for, for children ?
    thanks so much.

  3. the pastel color beads….which brand are those? Did you use biggie beads or small ones? I just love those colors.

    1. The pastel beads were the larger pony beads. I’m not sure of the brand, but they came in a plastic rainbow variety box at Michaels. 🙂

  4. I used neon perler beads and just made rondelles out of them. They turned out beautiful. Thank you for sharing.

  5. This was great. Thanks. I tried it with pony beads, but they melted into random blobs. Actually, HALF-melted blobs. I assume that’s because I got metallic ones. The perler beads turned out well, but they are super tiny. I also got rondelle beads and those turned out beautifully. Office gift exchange, here I come!

    1. I actually just tried the pearl finish pony beads yesterday myself, and they didn’t work very well either. They didn’t melt evenly, and I ended up with a semi-burnt blob of plastic. I’ve had fabulous success with the regular opaque pony beads as well as the clear and glittered beads, but I’d suggest staying away from the metallic and pearl finish ones. Sorry about that! Glad to hear that your other ones worked out well though! 🙂