Dodecahedron Star Lantern {Tutorial}

This post may contain affiliate links. If you make a purchase, I may receive a small commission.


dodecahedron star paper lanterns diy

You might remember my very first dodecahedron star lantern that I posted last Summer. I fell in love with our bold crayon colored lantern, but I still wanted to find the time to make more in the original soft style of oiled watercolor papers. It had been brought to my attention several times that the tutorial I linked to no longer exists in Blogland, and I noticed on my blog statistics that quite a few people have found their way here while Googling “dodecahedron star lantern tutorial.”

I did a quick internet search and realized that most of the other search results linked back to the same tutorial that no longer exists…so I decided to recreate it! Not quite as beautifully explained or photographed as the original, but I couldn’t leave all those Google searchers hanging, could I? 😉

making dodecahedron star paper lanternsI started by painting two 11″x14″ wet-on-wet watercolor paintings, just some basic color washes since they are going to get cut up into smaller pieces. Once the paint was dry I rubbed the papers with a thick layer of olive oil until it was saturated through to the back side, blotted off the excess and allowed the paintings to dry overnight.

crafting dodecahedron star paper lanternsWhile I was waiting for the paintings to dry, I printed out my Pentagon Template and used my Xacto knife to cut out one of the shapes to use as a stencil.

outlining shapes for dodecahedron star paper lanternsI traced the pentagon shape onto the back side of the paintings using a light colored pencil in a complimentary shade.
cut out shapes for dodecahedron star paper lanternsYou will need to cut out ten pentagons (eleven if you want to give your lantern a base/bottom).
lines outlined on geometric shapes with yellow pencilStarting at one of the corners, draw a line down to each of the opposite corners, and repeat until two lines have been drawn from each corner (it will look like you have drawn a star).
lines of star outlined on geometric shapes with yellow pencilFold the first corner in to meet the center of the line as shown above. Repeat for all five corners.

star shape cut out

star shapes cut out and in a pile
Keep folding, and folding, and folding…until all ten (or eleven) pentagons have been finished.
assembling sides of star lanternLine up two pentagons side-by-side. Open the flaps on the side where the pentagons are touching and lay both flaps open flat.
paperclips holding together pieces of star lanternGlue the flap from the pentagon on the right to the inside of the left pentagon. Turn the pentagon over and glue the flap on the outside down as well. Make sure to align the creases of the folds. I find that paperclips can be incredibly helpful to hold the pieces together while the glue dries. It seems to take a little while longer for the glue to dry since the paper has been oiled.

back side of pieces held with paperclips

assembling more pieces of lantern in a row with paperclipsContinue gluing the pentagaons together in the same fashion until you have created a chain of five.
bottom half of star lantern assembledGlue the first and last pentagon together to close the chain and make a loop. Repeat these steps again with the other five pentagons, and you will end up with the two halves of your lantern. Okay, here’s the part where I forgot to take a good picture – so sorry! (I know, I know…of course it would be at a critical step!)
Open up the flaps from the larger side of each of your lantern halves, and place the two halves of your lantern together. You can weave the flaps together by alternating sides to join the two pieces, but I find it works just as well if you keep it simple and less complicated. I join my lantern halves so that ALL the flaps from one half of the lantern go on the inside of the seam, and ALL the flaps from the other half go on the outside of the seam.
bottom piece added to star lantern
Can you see how the flaps from the top half are all on the outside of the center seam?

constructing simple star lanternYou will also need to glue the inside flaps at the seam, as well as the inside flaps at the top and bottom of the lantern. If you choose to add a base to your lantern, now would also be the time to add the 11th pentagon to the bottom of the lantern. I like to be able to slip my lantern right over my candle, so I choose to leave both the top and bottom open.

star lantern constructed with paper clips hanging off each sideAgain, paperclips work wonders if you don’t want to sit around waiting for the glue to dry!
pretty orange star lanternThe lantern looks so cheery and whimsical sitting on our sunlit mantle during daytime, but the real fun begins when night falls…
star lantern with candle lit insideAll you need is softly glowing candlelight ♥
kids enjoying homemade paper lanternsI lit our candle just as the sun was starting to set, and the boys were immediately drawn to it. I use a tealight set inside of a votive holder to keep the flame far from the paper, but you can opt for a battery operated candle too.
cool paper lanterns with star shapes
Simply stunning works of geometric art!
star shaped paper lantern for kids
easy to make paper lantern
We’ll be adding these to our Winter nature table to go with our Solstice Lanterns. The boys and I have been lighting candles almost every day lately, and I’ve really been appreciating the gentle meditative glow, especially of these star shapes dancing on our walls.
paper lantern activity for kids and adults

Leave a Reply

Your email address will not be published. Required fields are marked *

31 Comments

  1. Thank you for this tutorial! I did this with my 8th graders and they had a blast. We couldn’t figure out how to get the glue to stick (we used stick glue and hot glue–I guess we needed the white stuff, lol) so we used staples. 🙂

  2. Hello! I love these lanterns and want to make them with my children this year. Did you use the standard 140 lb watercolor paper? Thank you!!

    1. Yes! I saw that you found the answer in the comment, but answering here, too. 140 lb watercolor paper is perfect, but you could go a little bit lighter or heavier weight and still get good results as well. 🙂